Seagate BARRACUDA ST3500830AS User Manual download pdf (Page 27)

Barracuda 7200.10 Serial ATA Product Manual, Rev. J 21

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

** 7200.10 family product achieved higher sustained data rate over same 7200.9 family capacity points using identical measurement

methodology.

*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

Vibration, operating 5–22 Hz: 0.25 Gs, Limited displacement

22–350 Hz: 0.5 Gs

350–500 Hz:: 0.25 Gs

Vibration, nonoperating 5–22 Hz: 0.25 Gs, Limited displacement

22–350 Hz: 5.0 Gs

350–500 Hz:: 1.0 Gs

Drive acoustics, sound power

Idle*** 2.8 bels (typical)

3.0 bels (max)

Quiet seek 3.0 bels (typical)

3.2 bels (max)

Nonrecoverable read errors 1 per 10

bits read

Annualized Failure Rate (AFR) 0.34%

Warranty 5 years on distribution units.

To determine the warranty for a specific drive, use a web

browser to access the following web page:

www.seagate.com/support/service/

From this page, click on the “Verify Your Warranty” link.

You will be asked to provide the drive serial number,

model number (or part number) and country of purchase.

The system will display the warranty information for your

drive.

Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the Serial ATA Revision 2.5 specification Yes

Drive specification ST3120815AS ST3120215AS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

No comments

Seagate BARRACUDA ST3500830AS User Manual Page 27