Seagate ST1000LM015 Datasheet Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. C 6
DRIVE SPECIFICATIONS
2.3 RECORDING AND INTERFACE TECHNOLOGY
Recording method Perpendicular
Recording density 1894 Kb/in
Track density 375 ktracks/in avg
Areal density 705 Gb/in
2
avg
Spindle speed 5400 RPM +/- 0.2%
Sustained data transfer rate 100 MB/s max
I/O data-transfer rate 600 MB/s max
2.4 PHYSICAL CHARACTERISTICS
Height 9.5 +/- 0.2 mm (0.374 +/-.008 in)
Width 69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
Length 100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
Typical weight 115 g (0.254 lb)
Cache buffer 64MB (65,536 KB)
2.5 SEEK TIME
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The
specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead.
2.6 S
TART/STOP TIMES
Table 3 Start/stop times
Typical seek times (ms) Typical
Max @ 25
°C
Power-on to ready (sec) <1.0 <1.0
Power-on to ready (sec) (SED models) TBD TBD
Standby to ready (sec) <1.0 <1.0
Interface Serial ATA (SATA)
All models
Table 2 Typical seek times
Typical seek times (ms) Read
Track-to-track 2.0
Average 12.0
Average latency 5.6
NOTE
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.
However, due to the manner in which these drives are formatted, benchmark tests that include
command overhead or measure logical seeks may produce results that vary from these specifications.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Comments to this Manuals

No comments