Seagate ST318437LW Manual download pdf (Page 13)

Barracuda 36ES Product Manual, Rev. H 3

2.0 Applicable standards and reference documentation

The drive has been developed as a system peripheral to the highest standards of design and construction. The

drive depends upon its host equipment to provide adequate power and environment in order to achieve opti-

mum performance and compliance with applicable industry and governmental regulations. Special attention

must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regu-

lation. In particular, the drive must be securely mounted in order to guarantee the specified performance char-

acteristics. Mounting by bottom holes must meet the requirements of Section 8.3.

2.1 Standards

The Barracuda 36ES family complies with Seagate standards as noted in the appropriate sections of this Man-

ual and the Seagate

SCSI Interface Product Manual

, part number 75789509.

The Barracuda 36ES disc drive is a UL recognized component per UL1950, CSA certified to CSA C22.2 No.

950-95, and VDE certified to VDE 0805 and EN60950.

2.1.1 Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use.

As such the drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules

and Regulations nor the Radio Interference Regulations of the Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides

reasonable shielding. As such, the drive is capable of meeting the Class B limits of the FCC Rules and Regula-

tions of the Canadian Department of Communications when properly packaged. However, it is the user’s

responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O

cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to

the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host con-

troller.

2.1.2 Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is

the responsibility of those integrating the drive within their systems to perform those tests required and design

their system to ensure that equipment operating in the same system as the drive or external to the system

does not adversely affect the performance of the drive. See Section 5.1.1 and Table 2, DC power requirements.

2.2 Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking

and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-

tem represents the most popular characteristics for test platforms. The system configurations include:

• Typical current use microprocessor

• 3.5-inch floppy disc drive

• Keyboard

• Monitor/display

•Printer

• External modem

•Mouse

Although the test system with this Seagate model complies to the directives/standard(s), we cannot guarantee

that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance

and provide CE Marking and C-Tick Marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic

Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and

Directive 93/68/EEC of 22 July 1993.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 105 106

Comments to this Manuals

No comments

Seagate ST318437LW Manual Page 13

Comments to this Manuals

Related products and manuals for Internal hard drives Seagate ST318437LW