1 ECOLINE 1-Channel Digital Recorder TV8433INSTALLATION INSTRUCTIONS
10Hard disk Use only the hard disk supplied for the digital recorder or hard-disk models recommended for this purpose. Fitting the hard disk supplied
11First steps with the 1-channel digital recorder To start the 1-channel digital recorder: 1. Insert the hard disk as described and lock the HDD f
12Alarm menu The alarm menu gives you the following options: MAIN MENU ALARM FPS ALARM REC ALARM SIGNAL EXIT Use the direction keys (a,b,d,e) to sel
13Main menu The main menu gives you the following options: DATE, REC MODE REC FPS, REC QUALITY SCHEDULE, MULTIPLEXER AUTO REVERSE, CLEAR HDD EXIT U
14AUTO REVERSE As opposed to an analogue tape recorder, the digital recorder has no tape to rewind when it is full. The digital recorder has a so-ca
15Notes on using the 1-channel digital recorder with a multiplexer 1. Before connecting the digital recorder with the multiplexer, connect the digit
16Operating the 1-channel digital recorder Operating the digital recorder is user-friendly and almost intuitive. Manual data recording To start manu
17Locking the operating controls To prevent unintentional or unauthorised operation of the digital recorder during recording, you can lock the operat
18Scheduled recording At the time you programmed, the digital recorder automatically starts recording. The red recording LED lights up. The monitor
19 Playback To start playback on the digital recorder, make sure that it is in standby mode. First stop recording if active (only the green ON/OFF LE
2 Preface Dear Customer, Thank you for purchasing this ECOLINE 1-channel digital recorder. You made the right decision in choosing this state-of-th
20Fast forward and rewind To rewind or wind forward, press REW or FWD (a) or (d). Keep the respective key pressed. The longer the key is pressed, the
21 Playback – event search Event search simplifies the search for a specific alarm event. To activate this function, make sure that the digital reco
22To search the hard disk hour by hour: 1. In search mode, press the date/time Search button (6) again. The monitor displays the following: HOUR me
23Transferring image data to the PC The 1-channel digital recorder can transfer image data fast to a connected PC via the RS-232 interface. First ins
24Transferring picture sequences to the PC For details on using the 1-Channel Clipper software, see the user guide in pdf format on the CD-ROM. Addit
25Technical data Operating voltage: 100–240V AC / 50Hz Power consumption: 60 watt Hard disk: IDE 120GB (Western Digital) HDD frame: 5,25“ Vi
26Troubleshooting Despite the most meticulous quality controls in our company, it may happen that a device does not perform all functions as required
27List of compatible multiplexers The ECOLINE II digital recorder can be used with most multiplexers. The advantage is that signals from 4, 9, or 16
3Contents SCOPE OF DELIVERY...
4Installing the software for single-frame display ... 23 Operating the PC program ...
5Scope of delivery Packaging 1-Channel Digital Recorder Connection cables Installation Guide Data cable
6Overview • Modern Wavelet reference picture technique • Multiplexer compatibility permits recording of up to 16 camera signals (B/W and colour) •
7System design Single video source (camera) Combination with multiplexer 2nd monitor Main monitor
8 Rear connections (1) Voltage supply 100–240 V AC (2) Ventilator Never touch this! (3) Alarm Connections for alarm input and output
9Description of operating controls (1) Power[On/Off] Press to switch the digital recorder on or off. (2) Record Press to start recording
Comments to this Manuals