Seagate ST32000645SS Manual

Product ManualConstellation® ES.2 SAS100628615Rev. KSeptember 2012Standard models ST33000650SSST32000645SSSelf-Encrypting drive models ST33000651SSST3

2 Constellation ES.2 SAS Product Manual, Rev. K

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 3 1.0 SCOPEThis manual describes Seagate Technology® LLC, Constellation® ES.2 SAS (Serial Attached SC

4 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 2.0 APPLICABLE STANDARDS AND REFERENCE DOCUMENTATIONThe drives documented in this manual have been dev

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 5 2.1.2 Electromagnetic complianceSeagate uses an independent laboratory to confirm compliance with t

6 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 2.1.3 European Union Restriction of Hazardous Substances (RoHS)The European Union Restriction of Hazar

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 7 2.2 REFERENCE DOCUMENTSSAS Interface Manual Seagate part number: 100293071SCSI Commands Reference M

8 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 3.0 GENERAL DESCRIPTIONConstellation ES.2 drives provide high performance, high capacity data storage

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 9 3.1 STANDARD FEATURESConstellation ES.2 drives have the following standard features:• Perpendicular

10 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 3.4 RELIABILITY• Annualized Failure Rate (AFR) of 0.73%• Mean time between failures (MTBF) of 1,200,

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11 4.0 PERFORMANCE CHARACTERISTICSThis section provides detailed information concerning performance-r

© 2012 Seagate Technology LLC. All rights reserved.Publication number: 100628615, Rev. K September 2012Seagate, Seagate Technology and the Wave logo

12 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 4.2.3 General performance characteristicsMinimum sector interleave 1 to 1Data buffer to/from disk me

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 13 operations (disregarding Prefetch operation for the moment). That is, the drive does not check in

14 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 5.0 RELIABILITY SPECIFICATIONSThe following reliability specifications assume correct host and drive

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 15 5.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)The production disk drive

16 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Performance impactS.M.A.R.T. attribute data is saved to the disk so that the events that caused a pr

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 17 The current algorithm implements two temperature trip points. The first trip point is set at 65°C

18 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 5.2.6.2.2 Invoking DSTTo invoke DST, submit the Send Diagnostic command with the appropriate Functio

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 19 5.2.7 Product warrantySee “Seagate® Technology Support Services” on page 1 for warranty contact i

20 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 6.0 PHYSICAL/ELECTRICAL SPECIFICATIONSThis section provides information relating to the physical and

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 21 6.1.1 PowerChoice reporting methodsPowerChoiceTM provides these reporting methods for tracking pur

Constellation ES.2 SAS Product Manual, Rev. K Contents1.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Table 2 3TB drive (Standard & SED model) DC power requirementsNOTES3.0GB MODE 6.0GB MODE(AMPS)(A

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 23 Table 3 2TB drive (Standard & SED model) DC power requirementsNOTES3.0GB MODE 6.0GB MODE(AMPS)

24 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K [1] Measured with average reading DC ammeter. [2] Instantaneous +12V current peaks will exceed thes

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 25 6.3.3 Current profilesThe 3TB +12V (top) and +5V (bottom) current profiles for the Constellation E

26 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K The 2TB +12V (top) and +5V (bottom) current profiles for the Constellation ES.2 drives are shown bel

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 27 6.4 POWER DISSIPATION3TB models in 3Gb operationPlease refer to Table 2 for power dissipation numb

28 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 3TB models in 6Gb operationPlease refer to Table 2 for power dissipation numbers.To obtain operating

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 29 2TB models in 3Gb operationPlease refer to Table 2 for power dissipation numbers.To obtain operati

30 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 2TB models in 6Gb operationPlease refer to Table 2 for power dissipation numbers.To obtain operating

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 31 6.5 ENVIRONMENTAL LIMITSTemperature and humidity values experienced by the drive must be such that

Constellation ES.2 SAS Product Manual, Rev. K6.3.3 Current profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 6.5.3 Effective altitude (sea level)a. Operating–1000 to +10,000 feet (–304.8 to +3,048 meters)b. No

PACKAGE SIZE PACKAGED/PRODUCT WEIGHT DROP HEIGHT<600 cu in (<9,800 cu cm) Any 60 in (1524 mm)600-1800 cu in (9,800-19,700 cu cm) 0-20 lb (0 to 9

34 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 6.5.4.2 Vibrationa. Operating—normalThe drive as installed for normal operation, shall comply with t

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 35 6.6 MECHANICAL SPECIFICATIONSRefer to Figure 9 for detailed mounting configuration dimensions. See

36 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 7.0 ABOUT FIPSThe Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Governm

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 37 8.0 ABOUT SELF-ENCRYPTING DRIVESSelf-encrypting drives (SEDs) offer encryption and security servic

38 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K The variable "LockOnReset" should be set to "PowerCycle" to ensure that the data

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 39 8.11 REVERTSPSED models will support the RevertSP feature which erases all data in all bands on th

40 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 9.0 DEFECT AND ERROR MANAGEMENT Seagate continues to use innovative technologies to manage defects a

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 41 * For read retry count, every tick ~ 5% of total error recovery. Valid range setting is 1-20.

Constellation ES.2 SAS Product Manual, Rev. K Contents11.2 Dual port support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Note. During Pre-Scan write verify commands, write performance may decrease by 50% until Pre-Scan co

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 43 9.8.2 Setting and determining the current Type Level A drive is initialized to a type of PI by usi

44 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 10.0 INSTALLATIONConstellation ES.2 disk drive installation is a plug-and-play process. There are no

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 45 Figure 12. Air flowNote. Image is for reference only, may not represent actual drive.10.3 DRIVE

46 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 10.4 GROUNDINGSignal ground (PCBA) and HDA ground are connected together in the drive and cannot be

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 47 11.0 INTERFACE REQUIREMENTS This section partially describes the interface requirements as impleme

48 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11.3 SCSI COMMANDS SUPPORTEDTable 7 lists the SCSI commands supported by Constellation ES.2 drives.

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 49 Pages Supported list (00h) Y Read Error Counter page (03h) Y Read Reverse Error Counter page (

50 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Reassign Blocks 07h YReceive Diagnostic Results 1Ch Y Supported Diagnostics pages (00h) Y Translat

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 51 [1] Constellation ES.2 drives can format to 512, 520 or 528 bytes per logical block.[2] Warning. P

Constellation ES.2 SAS Product Manual, Rev. K

52 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11.3.1 Inquiry data Table 8 lists the Inquiry command data that the drive should return to the initi

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 53 3. Current valuesCurrent values are volatile values being used by the drive to control its operati

54 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Table 9 Mode Sense data changeable and default values for 3TB drives MODE DATA HEADER: 01 9a 00 10

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 55 Table 10 Mode Sense data changeable and default values for 2TB drives MODE DATA HEADER: 01 9a 00

56 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11.4 MISCELLANEOUS OPERATING FEATURES AND CONDITIONSTable 11 lists various features and conditions.

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 57 11.4.1 SAS physical interface Figure 13 shows the location of the SAS device connector J1. Figures

58 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K Figure 14. SAS device plug dimensionsC OF DATUM BL5.081.27 (6X)1.27 (14X)15.8750.35MIN15.87533.43

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 59 Figure 15. SAS device plug dimensions (detail)6.10Detail A0.30 0.05 x 45 (5X)0.40 0.05 X 45 (

60 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11.4.2 Physical characteristics This section defines physical interface connector.11.4.3 Connector r

CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 61 11.4.6 SAS transmitters and receiversA typical SAS differential copper transmitter and receiver pa

Constellation ES.2 SAS Product Manual, Rev. K vList of FiguresFigure 1. 3TB model current profiles . . . . . . . . . . . . . . . . . . . . . . . . .

62 CONSTELLATION ES.2 SAS PRODUCT MANUAL, REV. K 11.5.2 Differential signalsThe drive SAS differential signals comply with the intra-enclosure (int

Constellation ES.2 SAS Product Manual, Rev. K 63IndexNumerics12 voltpins 615 volt pins 616 Gbps 62Aabort task set function 47AC coupling 61AC pow

64 Constellation ES.2 SAS Product Manual, Rev. KDEK 37description 8DFE 62dimensions 35disk rotation speed 11drive 34drive characteristics 11Dri

Constellation ES.2 SAS Product Manual, Rev. K 65Korean KCC 5Llatencyaverage rotational 11, 12Locking SP 37LockOnReset 38logical block address 12

66 Constellation ES.2 SAS Product Manual, Rev. KQqueue tagging 56Rradio interference regulations 4Random number generator 37RCD bit 12read error r

Constellation ES.2 SAS Product Manual, Rev. K 67Trusted Computing Group 37Type 1 PI format 43Type 2 PI format 43Uunformatted 10Unrecoverable Error

68 Constellation ES.2 SAS Product Manual, Rev. K

Seagate Technology LLCAMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASI

vi Constellation ES.2 SAS Product Manual, Rev. K

Constellation ES.2 SAS Product Manual, Rev. K 1For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/c