Seagate Elite 9 Installation Guide download pdf (Page 37)

Elite 23 Installation Guide, Rev. A 35

N drives

Terminating the drive

ST423451N drives are terminated with permanently mounted IC

active terminators. If you install one of these drives and it is not

on the end of the SCSI bus, disable the terminators by removing

the TE jumper from pins 19 and 20 of connector J4A (see Figure

7). If you install the drive on the end of the SCSI bus, enable ter-

mination by installing a jumper on pins 19 and 20 of connector

J4A.

Figure 8. Terminating the drive

Terminator Enabled (TE)

Terminator Disabled (TE)

Pin 19

J01

J4B

J4A

Pin 1

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

No comments

Seagate Elite 9 Installation Guide Page 37