Seagate ST3320310CS - Pipeline HD 320 GB Hard Drive User's Guide download pdf (Page 146)

www.honeywell.com/security

146 | Performance Series HQA Digital Video Recorder User Guide

Installing a Hard Drive

On some HRHH DVR models, you can install an additional hard disk drive (HDD). For a list of

compatible HDDs, see the List of Compatible SATA HDDs on page 147. A 7200 rpm or higher

HDD is recommended.

CAUTION

Risk of electric shock. Disconnect power before

removing cover.

To install an additional HDD

1. If the DVR is connected to a power source, disconnect it before continuing.

2. Remove the top cover from the DVR housing by removing the four screws securing it to

the housing and then sliding the cover backwards.

3. Connect the SATA and power cables to the new HDD.

4. Position the new HDD over the four open screw holes in the base of the housing, adjacent

to the existing HDD.

5. Turn over the DVR housing and

secure the new HDD to the housing

using the four supplied HDD

mounting screws.

6. Attach the HDD to housing with the

four screws removed in step 4.

7. Replace the DVR top cover on the

DVR housing and secure it with the

four screws removed in step 2.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 152

No comments

Seagate ST3320310CS - Pipeline HD 320 GB Hard Drive User's Guide Page 146