www.honeywell.com/security
78 | Performance Series HQA Digital Video Recorder User Guide
Configuring SNMP Settings
You can use Simple Network Management Protocol (SNMP) to receive information from the
DVR remotely. You will need to install SNMP software on a PC to receive information from the
DVR via SNMP.
To configure SNMP settings
1. Go to Main Menu > Setting > Network > SNMP.
2. On the SNMP page, select the Enable check box to enable SNMP.
3. Configure the following settings:
4. Click Apply to save your settings.
5. If you want to exit the Setting menu, click Save.
•SNMP Version Select the check boxes of the SNMP version(s) that you are
using.
• SNMP Port The default setting is 161.
•Read-Community The default setting is public.
• Write-Community The default setting is private.
•Trap Access Enter the IP address of the computer running SNMP software.
• Trap Port The default setting is 162.
Comments to this Manuals