INSTRUCTION MANUAL (HD_Ver. 1.0_2012416) H.264 Video Compression High Definition Digital Video Recorder About this user guide Bef
10<NOTICE> The brands and models of all HDD should be the same. If the brands and models of the HDD are different, the DVR may not recognize H
100 10. Network – By an web-browser viewer The DVR provides a live remote monitoring feature by web-browser viewer. 1. Check the IP address
101 6. Click CONNECT button on the Left upper corner of web-viewer. Then “Connect” dialog is displayed. Enter IP address (or Domain name a
102www.okddns.com or www.ddnscenter.com, Port: Input Port number (The number is set on SETUP>NETWORK>PORT.) ID: Input ID of DVR. Pa
103APPENDIX: How to connect network A. How to set IP address of the DVR and open TCP port of the router? The port forwarding is dependent on
104 Open your web browser. Enter the router IP address in the address bar (The router IP address are different with the brand and model.), click GO.
1057. Select the Save settings button located on the bottom of the window. Then Port forwarding is finished. B. How to access DVR fr
1064. Input Site Name, Site Address(IP address), Port No., and Password on the connect window. And click OK. Then, press button after checking t
1079. Click button and add the DVR as necessary. Model: Select one type surely among SDVR series, H DVR series DVR / N series DVR, H
11 2. Go to SETUP>SYSTEM>SET DATE & TIME 3. Select DAYLIGHT SAVING. Setting NTP
12 2. Select proper TIME ZONE time. NOTE: If you want the unit to automatically synchronize the local time, the Time Zone must be properly set a
13Specification ITEM XHR204 XHR208 XHR216 Video Input Channel, Input Level 4/8/16CH HD-SDI (1080p25/30, 1080i50/60, 720p25/30/50/60 Auto Detect
14User I/F Input Method Front button, Remote control, Mouse, Keyboard controller Serial port Console 1 RS-232C PTZ & Keyboard control 1 RS-4
15Channel Sequence 3 ~ 60 seconds Auto Recording Compression H.264 Resolution Up to 1920x1080 Recoding Quality Grade 5 Levels Recording Mode
16Features DST (Daylight Saving Time) Yes Internal Beep By Video Loss, HDD Error Multi Language Yes (more than 20 languages) Software Upgrade By
17Table of Contents 1. Name, Function and Connection ... 19
184-3. Play mode ...
19Name, Function and Connection 1-1. Front Panel The following information will help you to operate the front panel controls. Figure 1.1.1. Fron
2 Safety Precautions Explanation of Graphical Symbols WARNING To reduce a risk of fire or electric shock, do not expose this produ
208 F/REW Jump/Step backward. In playback mode, the playback position moves 60 seconds backward. 9 ALARM Press to enable/disable ALARM operation
211-2. Rear Panel Figure 2.2.1. Rear Panel Table 2.2.1. Rear panel connections NO Connection Purpose 1 VIDEO IN HD-SDI connectors for vid
22VGA output 6 E-SATA External SATA terminal 7 ETHERNET RJ-45 connector for network function 8 USB Port Connector for Mouse or Backup 9 SEN
231. Setting up the DVR The following sections detail the initial setup of a DVR. 2-1. Setup – Main Screen To enter the setup menu, select ME
24Use the Virtual Keyboard when you use front key and mouse. The factory default password is 1111. It is highly recommended to assign a new
25– REMOTE CONTROL ID – SENSOR - TYPE STORAGE – OVERWRITE – DISK FORMAT – DISK INFO – RECORDING LIMIT - RECORDING LIMIT DAYS – S.M.
26 2-2. Setup – Display Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select DISPLAY i
272-3. Setup – Recording Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
28 RECORD MODE This compact DVR has a record mode. Maximum recording frame rate per channel is different by the record mode as follows. Record mod
29QUALITY Select the recording quality for the specified channel. Options are: Level 1 (Low), 2, 3, 4 and 5 (High) RECORDING Assign the recording
3 These precautions must be followed for safety reasons. Warning Do not use if the unit emits smoke, strange sounds
30 Figure 2.3.2. Schedule recording setup screen C: CONTINUOUS recording, when you select the color will change to Blue Color M: MOTION recording,
31 Figure 2.4.1. Device mode setup screen Table 2.4.1. Menu items in Device Setup screen Item Description ALARM OUT Set the sensor, motion, and
32SENSOR Select sensor NO from 1 to 4 TYPE Set the type of sensor for the specified channel. Options are: OFF, N/O (normal open), and N/C
33 Figure 2.4.3. Controller and PTZ Control Setup Screen Note: For speed dome cameras that support RS-485, connect them directly to t
34 Figure 2.4.4. Motion Zone selection screen 2-5. Setup – Storage Mode Press the SETUP button and enter the password. The setup menu is di
35Table 2.5.1. Menu items in STORAGE Setup screen Item Description OVERWRITE When enabled, the DVR will continue recording and overwrite
36 RECORDING LIMIT Enable/disable recording limit. RECORDING LIMIT DAYS Set the recording limit days.(1- 90 days) The data will remove by the hour.
37SYSTEM icon and press SEL button to enter the menu item. Navigate through the menu items using the control button (◀ ▲ ▶ ▼) and change the value
38 LANGUAGE Select the display language using the control button (◀ ▲ ▶ ▼). Once a language is selected, the display language changes
39of the daylight saving period. - Select BEGIN or END using the control button (◀ ▲ ▶ ▼) and press the SEL button. - Select the i
4 - In the event that a foreign object is inside the unit, turn off and unplug the unit. Consult the dealership where this uni
40 TRANSMISSION MODE: Sending an image only of the channel that triggered the alarm when an alarm event is triggered. IP NOTIFICATION: Enable/di
412-7. Setup – SECURITY Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select S
42Select USER PASSWORD using control button (◀ ▲ ▶ ▼) and press SEL button. Select user type using the control button (◀ ▲ ▶
43 Figure 2.8.1. NETWORK setup screen Table 2.8.1. Menu items in Network Setup screen Item Description PORT Port number (Default: 5445) NETWORK
44“SERVER 1” : Using free DDNS server “SERVER 2” : Using Customers own DDNS server “SERVER 3” : Using free Auto DDNS server CAUTION: Do not ch
45(See your network administrator if you do not have this information.) 2. When DVR is installed in IP sharer that is connected with ADSL, a user
46③ SERVER3 Auto DDNS. This is an easy auto DDNS setup feature. If selected, the DVR will automatically register itself with okddns.com. This fe
47 2-9. Setup - CONFIG Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select CO
48UPGRADE Upgrading Firmware. 2-10. Quick Setup In the MENU, select the QUICK SETUP tab. Then, the QUICK SETUP menu is displayed as pictured below
493. Live, Search, and Playback 4-1. Live Viewing Screen In the Live screen, video inputs from the cameras are displayed as they are configur
5 - Doing so may cause the unit to fall, be damaged and/or result in injury. Make sure the cables are connected properly. - Connect and i
50 Click this SEQUENCE icon when you want to activate the sequential screen Click this MANUAL RECORD icon when you want to manually recor
514-2. SEARCH Screen To enter the search screen, select SEARCH menu on the screen using the mouse or press SEARCH icon on live screen. Figure 4.2
52 When it clicks a Timeline menu, user can see a calendar which has recording data. Select a specific date and time. Use a drag-and-drop funct
53 When it clicks an Event menu, user can see a calendar which has recording data. Select a specific date and then user can see all data. Pr
54date and time, the DVR will play the latest video data. 4-2-6. Archive Search The ARCHIVE Search window is used to find previously stored vid
55When it clicks a Log menu, user can see a calendar which has recording data. Select a specific date and press NEXT button. Then user can see all
56 5. PTZ Control To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the item you wish to control
57Set the number (1 digit) using the number key and press SEL to make the group number work. Press the left key (◀) on the control button to stop
58 Figure 6.1.1. Video Archiving and Backup Screen 6-2. Transferring still images or video from the ARCHIVE list The stored data onto hard drive
59 Figure 6.2.1. Archive Search Screen 6-3. Playback of Backup Video NSF format: NSF format video can be played back by the pla
6 . Areas where the unit will be exposed to constant vibration (in trains, cars, etc.) Cautionary points on condensation - Droplets may form o
60 7. Upgrading Firmware In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory stick. Create a
61 3. You can see the following message when pressing the scan button. Please check the current firmware version and the firmware version which y
62 6. You could see the following warning message if you don’t pull out the USB memory stick. Remote Firmware Upgrade User can upgrade the firm
63 2. Press the password for admin. Just admin is possible to connect to the remote setup menu. 3. Go to the Remote Upgrade menu. The
64 4. Then, you can see the following progress bar and it would be taken around 150 seconds to upgrade.
65 5. When finishing the upgrade, the network streaming would be connected again automatically and you can see the following screen. Please check
668. Network access using the Exclusive network viewer, UMS single The DVR provides a live remote monitoring feature. Remote monitoring req
67 8-3. Live monitoring mode and functions. Button Function Description DATE & TIME Displays the current date and time. CONNECT/DISCONN
68 NETWORK BANDWIDTH Shows the transferred frames and network bandwidth. AUDIO Adjust the volume. The audio can be turned on or off
69 3. Set the conditions and click OK button. Then still-image is saved. 8-4. Bi directional audio The UMS Clien
7 Product Components The package contains the main unit and its components as specified below. When you purchase the unit, Please check to ensur
70 CAPTURE Capture a still image from live screen. MARK IN Set the start time for video backup. MARK OUT Set the ending time for video backup.
71 Backup of video in the remote DVR Video recorded in the remote DVR cab be backed up on the PC HDD as AVI fo
72 File path: Shows the folder that the backup file is recorded. Channel: Shows backup channel. 8-6. PC System configuration Click the SETUP b
73 Setting Event Set the record path and the size of local disk space for the log files. LOG – Select to save event l
74 Setting Record Set the recording conditions and select channels to record. Select the local disk to use and the a
759. Network access using the Exclusive network viewer, UMS multi 9-1. Overview The UMS Multi-Client is a multiple site monitoring client
76 3. Select the program folder and click “Next”. 4. The setup status screen is displayed. 5. After the installation is completed,
779-4-1. Main user interface 9-4-2. Control buttons Button Description LOCAL PLAYBACK Click this icon to run a playback window to
78 PAUSE Click this icon to play/pause live video. ALARM ON RECORD ON Enable or disable recording of live video to local disk which has set
79 9-5-2. Main control panel Button Description LOCAL PLAYBACK Click this icon to run a playback window to search and play vid
8 HDD INSTALLATION GUIDE 1. Remove the unit’s cover. 2. Fix the supplied rubber pads to the supplied HDD mounting bracket. Then fix the hard d
80 SETUP Click this icon to setup configuration of UMS MULTI CLIENT. CAPTURE Click this icon to capture a still image. EVENT LIST MARK IN Cl
81 To change a time line scale from 24 hours to 60 minutes or vise versa. The timeline shows recorded data in color on the bar. You can adjus
82You can also set the save path for capturing and backup. 9-6-1-2. Save Path: Specify the location to save captured still image for Capture and Bac
83 9-6-2-2. Archiving Event Log: Event log can be searched from selected time. 9-6-3. Record 9-6-3-1. Record setup: You can set the recordi
84 9-6-3-2. Record local storage setup: You can select the local disk to use and the amount of disk space you want to allow the program to use for r
85 9-6-6. About “About” provides network client version information. 9-7. Remote Setup The menu settings for the DVR unit can be set from a PC
86 Then the setup window is displayed as follows to check the password for admin. Just admin is possible to connect to the remote setup menu. The s
87 User can set the value on this remote setup page. After setting the value, please press the APPLY button. Then the value would be applied to th
88 9-7-3. DEVICE 9-7-4. STORAGE 9-7-5. SYSTEM
89 9-7-6. NETWORK
9 would be better when installing the first HDD to HDD1 port because the system recognizes the first HDD as a master HDD. For a system stab
90 9-7-7. UPGRADE Please refer to page 54 for the Remote Upgrade. 9-8. Operation 9-8-1. Addition, Delete, and modify of DVR sites 9-8-1-1. Ad
91o IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.okddns.com
92 2. Click NET FINDER button. And then the following window displays. 3. Click MODIFY button. And then the modified information is appl
93 2. Click CONNECT button, and then site/sites displays/display as connected. 9-8-2-2. Disconnect 1. Select site/sites to disconne
94 9-8-3. Still-image capture during Live 1. Double-click a channel to capture from the display screen. (Otherwise all channels will be captured.).
95 9-8-4. Recording video on local PC during Live 1. Click SETUP button. And then a setup window display. 2. Select Record and set the
964. Click RECORD ON button. And the color of button is changed. 5. Live video data is recorded as set in Record and Disk setup. The
97 9-8-5-2. Playback of recorded video on remote DVR 1. Click REMOTE PLAYBACK button. And then Playback Window display over Live Window.
98 9-8-6. AVI Backup during playback You can back up the recorded videos in AVI format during playback. 1. Double-click the target channel to back
99 6. You can also set the beginning time and ending time on this window. After selecting a channel for backup, click the OK button. The backu
Comments to this Manuals