Seagate ST3250310SV - 250GB 7200RPM Sata Surveillanc Instruction Manual download pdf (Page 32)

SENSOR Select sensor NO from 1 to 4

TYPE

Set the type of sensor for the specified channel. Options are:

OFF, N/O (normal open), and N/C (normal closed).

2-4-1. ALARM-OUT

Figure 2.4.2. ALARM-OUT setup screen

Table 2.4.2. Menu item in ALARM-OUT Setup screen

Item Description

ALARM OUT Select an alarm out number.

Available NO: 4ch (1), 8ch (2), 16ch (4)

SENSOR IN

Enable Alarm Out by Sensor up to 4/8/16 Inputs.

MOTION ON

Enable Alarm Out by Camera Motion up to 4 cameras.

VIDEO LOSS ON

Enable Alarm Out by Video Loss up to 4 cameras.

ALARM DURATION

Set the alarm dwell time from 5 to 60 seconds.

ERROR ALARM Set the error type for the alarm activation. The options are

OFF, ALL, HDD ERROR and VIDEO LOSS.

2-4-2 Controller & PTZ Setup

To control the controller and PTZ functions of the camera, connect a controller to the RS-485 port.

① Connect the RS-485 cables of Controller and PTZ camera to the RS-485 port on the rear panel.

② Press SEL button or double click to enter the menu. Then Controller and PTZ menu screen is

displayed.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 106 107

No comments

Seagate ST3250310SV - 250GB 7200RPM Sata Surveillanc Instruction Manual Page 32