Seagate ST3250310SV - 250GB 7200RPM Sata Surveillanc User Manual download pdf (Page 162)

Internet Explorer can find it from a remote

location, a process known as “port

forwarding.” Your Internet Service

Provider – or ISP (such as AT&T or

Infinity/Comcast) will often set your DVR

up for you once it is available on your

local network. Call them first, and they can

walk you through the process, or

sometimes they can “take over” your

router and do the set up for you. You will

need your router’s brand & model number.

TIP: www.PortForward.com has instructions for many models of routers.

Note: You can also view your cameras on Apple Iphone / Ipad, and Android devices with an

optional viewer app, available here: http://www.clearviewcctv.com/DVRs/Ipad-Iphone-Interface/

If your ISP cannot assist you, you can enter numbers manually in the NETWORK screen. Log in to the DVR

with your User Name & Password, go to SETTINGS then to NETWORK SETTINGS and enter:

• TCP port: Default value is 37777. You can change if necessary.

• UDP port: Default value is 37778. You can change if necessary.

• HTTP port: Default value is 80.

• RTSP port: Default value is 554.

When these values are entered, hit SAVE at the bottom of the window. Write down your DVR’s IP address

line on the screen above), and then back out through the SETTINGS and MAIN MENU. Once you hit

“SAVE”, give the changes a few minutes to work through your ISP’s system. Check if your DVR is online by

entering it in Internet Explorer as “http://enter your IP address”

ClearView gives you a FREE DDNS service - when you register your new DVR online! The DDNS (Dynamic

Domain Name System) automatically keeps your DVR online, and gives your DVR an easy to remember “host

name” rather than a numeric IP address - mydvr.no-ip.com for

example instead of 198.102.10.55. DDNS will also automatically

update your DVR if your IP address changes (which can happen

if you don’t pay your ISP extra for a “static IP.”)

To use DDNS, first log into your DVR, navigate from the 'Main

Menu', to 'Settings,' and then 'Network'. Under the 'Advanced'

section, double click the DDNS section and highlight the 'enable'

button. Next, you will be given the choice – depending on model -

of either No-IP, DYDNS, ICRDDNS or ClearviewDDNS - any of

these DDNS hosts are FREE – choose one.

Now, on your computer, go to http://register.clearviewcctv.com

and register your DVR, and on that screen select the DDNS host you decided on, and you will be given a host

name. Write that name down. Back on your DVR, select the 'custom domain name' option, click in the

'domain name' space, and input the host name you were given. Everything else is already in place. Enter in

your e-mail address under it to track it at a later time. Test your setup by clicking the 'test' option. You will get a

success prompt if everything goes well. Click 'ok' to exit and save your information.

TIP: Save / Bookmark your new address as a “favorite” for easy access.

For more detailed information, our DVR Quick Start Guide available for download or online viewing

http://www.clearviewcctv.com/Tools/Download-Center

You can also contact our Tech Support line at (954) 772-5327 and they will assist you. CVSMP11.13

FOR FREE!

1 2 ... 157 158 159 160 161 162 163

Comments to this Manuals

No comments

Seagate ST3250310SV - 250GB 7200RPM Sata Surveillanc User Manual Page 162

Comments to this Manuals