Seagate Elite 9 User Manual download pdf (Page 22)

Installation 17

Unpacking, inspection, and repacking

After removing the packing material, inspect the drive for shipping damage.

Save all packing materials for future use.

The drive is shipped separately from any other items ordered for the installation.

Unpacking

1. Allow the drive temperature to approach the ambient temperature of the

unpacking area. Ensure that the temperature stabilization period meets the

requirements printed on the drive container.

2. Open the package and remove the drive from its conductive static shielding

bag, using the precautions described in the preface.

3. Check all items against the shipping bill for required equipment and hard-

ware to complete installation. Discrepancies, missing items, damaged

equipment, etc., should be reported to the sales representative from whom

the drive was purchased.

Inspection

Inspect the drive for possible shipping damage. All claims for shipping damage

should be filed with the carrier involved.

Repacking

If it is necessary to ship the drive, repack the drive with the original packing

materials (saved during unpacking). Refer to section 5 for instructions.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

No comments

Seagate Elite 9 User Manual Page 22