Seagate ST32430N Specifications download pdf (Page 132)

Section 10—CD-ROM Drive – CD-ROM Replacement

130 Application ModuleX Service 12/01

Honeywell

10.3 CD-ROM Replacement

Overview

Node power must be turned off for the purpose of changing circuit

boards in the A

M node.

WARNING

Damage can result—Circuit board damage can result if

you do not practice proper ESD procedures or attempt to

remove/ insert a circuit board with node power applied.

CAUTION

Mandatory steps—It is mandatory that appropriate

software shutdown procedures are followed for the A

coprocessor prior to removing power from the node.

Failure to do so can cause damage to the HP-UX file

structure on the coprocessor hard disk.

ATTENTION

It is also highly recommended that you perform a node

processor software shutdown when preparing to power off

the AXM node. This provides for an orderly departure from

the LCN network.

Locating

shutdown

procedure

Software shutdown procedures for both the A

M coprocessor and node

processor are documented in the Application Module

System

Administration manual. Reference: >> A

M System Administration

manual (Section 3)

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 153 154

No comments

Seagate ST32430N Specifications Page 132