Mirroring the Root Volume on Integrity Servers
The procedure to mirror the root disk on Integrity servers is similar to the procedure for PA-RISC servers. The
difference is that Integrity server boot disks are partitioned; you must set up the partitions, copy utilities to the EFI
partition, and use the HP-UX partition device files for LVM commands.
For this example, the disk is at hardware path 0/1/1/0.1.0, with a device special file named
/dev/rdsk/c2t1d0.
1. Partition the disk using the idisk command and a partition description file.
a. Create a partition description file. For example:
# vi /tmp/pdf
In this example the partition description file contains:
3
EFI 500MB
HPUX 100%
HPSP 400MB
b. Partition the disk using idisk and the partition description file created in step 1a:
# idisk -f /tmp/pdf -w /dev/rdsk/c2t1d0
To verify that your partitions are correctly laid out, run the following command:
# idisk /dev/rdsk/c2t1d0
2. Use the insf command with the -e option to create the device files for all the partitions. For example:
# insf -e -H 0/1/1/0.1.0
You should now have the following device files for this disk:
/dev/dsk/c2t1d0
The entire disk (block access)
/dev/rdsk/c2t1d0
The entire disk (character access)
/dev/dsk/c2t1d0s1
The EFI partition (block access)
/dev/rdsk/c2t1d0s1
The EFI partition (character access)
/dev/dsk/c2t1d0s2
The HP-UX partition (block access)
/dev/rdsk/c2t1d0s2
The HP-UX partition (character access)
/dev/dsk/c2t1d0s3
The Service partition (block access)
/dev/rdsk/c2t1d0s3
The Service partition (character access)
3. Create a physical volume using pvcreate with the -B option. Be sure to use the device file denoting the HP-
UX partition.
# pvcreate -B /dev/rdsk/c2t1d0s2
4. Add the physical volume to your existing root volume group using vgextend:
# vgextend /dev/vg00 /dev/dsk/c2t1d0s2
5. Use the mkboot command to set up the boot area. Specify the -e and -l options to copy EFI utilities to the
EFI partition, and use the device special file for the entire disk:
26
Comments to this Manuals