Seagate 600 Pro SSD Manual download pdf (Page 26)

SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. B 22

4.0 SERIAL ATA (SATA) INTERFACE

These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed

input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6.

For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment”

specification.

4.1 HOT-PLUG COMPATIBILITY

Seagate 600 Pro SSD drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial

ATA II: Extension to Serial ATA 1.0a specification. This specification can be downloaded from www.serialata.org.

4.2 SERIAL ATA DEVICE PLUG CONNECTOR PIN DEFINITIONS

Table 9 summarizes the 2.5” drive Signal and Power SATA Plug.

Notes:

[1] Ground pins 4 and 12 mate first on SATA backplane connectors.

[2] The three V

pins are unused but connected together on the drive. They can be used for a drive-in-place detection.

[3] The three V

pins are unused but connected together on the drive. They can be used for a drive-in-place detection.

Table 9 2.5” SATA Connector Plug Pinout

Segment Pin Function Definition

Signal

S1 GND Ground

S2 A+

Differential Signal Pair (Host to Drive)

S3 A-

S4 GND Ground

S5 B-

Differential Signal Pair (Drive to Host)

S6 B+

S7 GND Ground

Key and spacing separate signal and power segments

Power

P1 V

Unused

[2]

P2 V

P3 V

P4 GND

Ground

[1]

P5 GND

P6 GND

P7 V

5V power to DriveP8 V

P9 V

P10 Ground Ground

P11 LED Signal Activity LED: Driven low to light

P12 Ground Ground

[1]

P13 V

Unused

[3]

P14 V

P15 V

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Comments to this Manuals

No comments

Seagate 600 Pro SSD Manual Page 26

Comments to this Manuals

Related products and manuals for Solid state drives Seagate 600 Pro SSD