Seagate 600 Pro SSD Manual download pdf (Page 7)

SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. B 3

2.0 DRIVE SPECIFICATIONS

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For

convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models:

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this

manual may not be predictive of future generation specifications or requirements. If you are designing a system which will

use one of the models listed or future generation products and need further assistance, please contact your Customer

Technical Support Engineer or our global support services group as shown in See “Seagate® Technology Support Services”

on page 1.

2.1 SPECIFICATION SUMMARY TABLES

The specifications listed in the following table is for quick reference. For details on specification measurement or definition,

see the appropriate section of this manual.

Table 1Drive specifications summary for 2.5” - 400, 200 and 100 GB models

Capacity

480GB 400Gb 240GB 200GB 120GB 100GB

2.5” Managed Life

ST480FP0001 ST400FP0001 ST240FP0001 ST200FP0001 ST120FP0001 ST100FP0001

2.5” Limited Warranty with Media Usage

ST480FP0021 ST400FP0021 ST240FP0021 ST200FP0021 ST120FP0021 ST100FP0021

Drive specification

ST480FP0001

ST480FP0021

ST400FP0001

ST400FP0021

ST240FP0001

ST240FP0021

ST200FP0001

ST200FP0021

ST120FP0001

ST120FP0021

ST100FP0001

ST100FP0021

Formatted GB (512 bytes/sector)

[1]

480 400 240 200 120 100

Guaranteed logical block addresses

(LBAs)

937,703,088 781,422,768 468,862,128 390,721,968 234,441,648 195,371,568

Emulated Bytes per LBA 512

Peak128KB sequential read/write data

transfer rate (MB/s max)

520/450 520/300

Sustained 128KB sequential read/write

data transfer rate (MB/s max)

520/450 520/300

Peak 4KB Random read/write command

rate (KIOPs)

85/30 80/20

Sustained 4KB Random read/write com-

mand rate (KIOPs)

85/11 85/30 85/11 85/30 80/8 80/20

Flash Memory Type NAND MLC

I/O data-transfer rate (MB/s max) 600

Height (mm max) 7.00 mm (0.276 in)

Width (mm max) 70.10 mm (2.760 in)

Length (mm max) 100.45 mm (3.955 in)

Weight (max) 100 g (0.220 lb)

Power-on to ready (sec typ)

[2]

3 sec

Standby to ready (sec max) 3 sec

Average LBA access time (μs typ) ~158 μs read; ~125 μs write

Data Retention (typical minimum at 40°C) 3 months

Sustainable Write Bandwidth under

JEDEC Mix for 3 Year Endurance at 100%

duty cycle in MB/sec

2.5 9.7 1.3 4.8 0.6 2.4

Startup current 5V (typical/peak) 550 / 600 mA

Voltage tolerance (including noise) 5V ± 5%

Temperature

0° to 70°C (operating as reported by SMART attribute 194)

–40° to 75°C (nonoperating)

Temperature gradient (°C per hour max)

20°C (operating)

20°C (nonoperating)

Relative humidity

5% to 95% (operating)

5% to 95% (nonoperating)

Relative humidity gradient 20% per hour max

1 2 3 4 5 6 7 8 9 10 11 12 ... 40 41

Comments to this Manuals

No comments

Seagate 600 Pro SSD Manual Page 7

Comments to this Manuals

Related products and manuals for Solid state drives Seagate 600 Pro SSD