Seagate 600 Pro SSD Manual download pdf (Page 37)

SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. B 33

4.3.3 S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for drives. When S.M.A.R.T. is enabled, the drive monitors predetermined

drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T.

makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes

the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-8 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4

) that eliminates

unnecessary drive returns. The diagnostic software ships with all new drives and is also available at:

http://www.seagate.com/support/downloads/seatools/.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports

S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x 04 (abort) is written

to the Error register.

4.3.4 SSD Percentage Endurance Remaining Indicator

An application can interrogate the drive through the host to determine an estimate of the percentage of device life that is

remaining. Seagate SeaTools diagnostic software has the capability to report the indicator value.

Table 13 S.M.A.R.T. commands

CODE IN FEATURES

S.M.A.R.T. COMMAND

S.M.A.R.T. Read Data

S.M.A.R.T. Execute Off-line Immediate (runs DST)

S.M.A.R.T. Read Log Sector

S.M.A.R.T. Write Log Sector

S.M.A.R.T. Enable Operations

S.M.A.R.T. Disable Operations

S.M.A.R.T. Return Status

1 2 ... 32 33 34 35 36 37 38 39 40 41

No comments

Seagate 600 Pro SSD Manual Page 37