Seagate TS-251-4G User Manual download pdf (Page 110)

110

2. Select "Manage encryption key". Click "Next".

3. Select to change the encryption password or download the encryption key file to

the local PC. Click "Next".

Data Sharing

Disk usage settings for 1-drive models. Select one of the following settings for an

external storage device connected to a 1-drive NAS:

Data sharing: Use the external drive for storage expansion of the NAS.

Q-RAID 1: Configure the external drive and a local hard drive on the NAS as Q-RAID

1. Q-RAID 1 enables one-way data synchronization from the NAS to the external

storage device but does not offer any RAID redundancy.

Note that the external

drive will be form atted when Q-RAID 1 is executed.

After Q-RAID 1 has been executed once, the NAS data will be automatically copied to

the external storage device whenever it is connected to the NAS.

Note:

Only one external hard disk can be set as Q-RAID 1 at one time.

The maximum capacity supported for Q-RAID 1 is 2TB.

It is recommended to use an external storage device of the same capacity as the

internal hard drive of the NAS. If the storage capacity of the external storage

device is too small to synchronize with the internal hard drive, the device can only

be used for data sharing.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 312 313

No comments

Seagate TS-251-4G User Manual Page 110