Seagate TS-251-4G User Manual download pdf (Page 205)

205

7.12 RADIUS Server

The NAS can be configured as a RADIUS (Remote Authentication Dial In User Service)

server to provide centralized authentication, authorization, accounting management for

computers to connect and use a network service.

To use this feature, follow the steps below:

1. Enable RADIUS Server on the NAS in "RADIUS Server" > "Server Settings". Click

"Apply".

2. Add RADIUS clients, such as Wi-Fi access points and VPN, on the NAS in "RADIUS

Server" > "RADIUS Clients". Up to 10 RADIUS clients are supported. Click "Create a

Client".

3. Enter the client information and click "Apply".

4. The clients are shown on the list.

5. Create RADIUS users and their password in "RADIUS Server" > "RADIUS Users". The

users will be authenticated when trying to access the network through the RADIUS

clients. The maximum number of RADIUS users the NAS supports is the same as the

maximum number of local NAS users supported. See the chapter on Users for

details. Click "Create a User".

6. Enter the username and password. The username supports alphabets (a-z and A-Z)

and numbers (0-9) only. The password must be 8-32 characters (a-z, A-Z, and 0-9

only). Click "Apply".

7. Specify to grant dial-in access to local NAS users. Enable this option to allow the

local NAS users to access the network services through the RADIUS clients using

their NAS login name and password. Click "Apply".

128

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 312 313

No comments

Seagate TS-251-4G User Manual Page 205