Seagate TS-251-4G User Manual download pdf (Page 83)

4.3 Network

Go to "Control Panel" > "System Settings" > "Network" to configure the network settings

of your NAS.

TCP/IP

(i) IP Address

Configure the TCP/IP settings, DNS Server and default Gateway of the NAS on this

page.

Click the "Edit" button next to an interface under "Edit" to edit the network settings

(including "Network Parameters", "Advanced Options", and "DHCP Server".) For the NAS

with two LAN ports, users can connect both network interfaces to two different

switches and configure the TCP/IP settings. The NAS will acquire two IP addresses which

allow access from two different subnets. This is known as multi-IP settings*. When using

the Finder to detect the NAS IP, the IP of the Ethernet 1 will be shown in LAN 1 only and

the IP of the Ethernet 2 will be shown in LAN 2 only. To use the port trunking mode for

dual LAN connection, see section (iii).

* TS-110, TS-119, TS-210, TS-219, TS-219P, TS-119P+, TS-219P+, TS-112, and TS-

212 provide one Giga LAN port only therefore do not support dual LAN configuration or

port trunking.

Network Param eters

Under the "Network Parameters" tab on the TCP/IP Property page, configure the following

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 312 313

No comments

Seagate TS-251-4G User Manual Page 83