70
4.2.5.2 Target Management
Creating iSCSI Targets
Note:
The description below applies to non Intel-based NAS models running
firmware version
3.3.0 or later
and Intel-based NAS models running firmware
version
3.2.0 or later
only.
You can create multiple LUNs for an iSCSI target. Follow the steps below to create
more LUNs for an iSCSI target.
1. Click "Quick Configuration Wizard" under "Target Management".
2. Select "iSCSI LUN only" and click "Next".
3. Select the allocation method. Enter the name of the LUN, select the LUN directory,
and specify the capacity for the LUN. Click "Next."
4. Select the target to map the LUN to (optional step).
5. Confirm the settings and click "Next."
6. When the LUN has been created, click "Finish" to exit the wizard.
7. The LUNs created can be mapped to and unmapped from the iSCSI target anytime.
You can also unmap the LUN from a target and map it to another target.
The iSCSI target is ready but no
initiator has connected to it yet.
The iSCSI target has been
connected by an initiator.
The iSCSI target has been
disconnected.
The iSCSI target has been
deactivated and cannot be
connected by the initiator.
The LUN is active for connection
and is visible to authenticated
initiators.
The LUN is inactive and is invisible
to the initiators.
Comments to this Manuals