Seagate NAS 400 User's Guide download pdf (Page 15)

Setup Steps for Administrators

BlackArmor® NAS 440/420 User Guide (Version 3) 16

Setup Steps for Administrators

If you are not a BlackArmor administrator, skip to page 24.

Installing the BlackArmor Server and Software

Before you begin:

• Ensure that your computer meets the requirements listed on page 8.

• Ensure that you have a solid, flat, stable surface for the server to sit on in an area with

reliable ventilation. Ensure that the server’s vents will not be covered or blocked and that

the server is not placed near a heat source. Ensure that the server won’t be in an area

where liquids may be spilled on it.

• Ensure that you have help lifting the server if you are uncomfortable lifting objects of

moderate weight.

To install the BlackArmor server and software:

1. Use the Ethernet cable included in the kit to connect the BlackArmor server to a switch or

router on your local network. Connect the Ethernet cable to port 1, as shown below.

If you have a second Ethernet cable and want to connect both LAN ports to the switch or

router, connect it now. See page 38 for more information.

2. Use the power adapter included in the kit to connect the BlackArmor server to a grounded

power outlet.

The server powers on automatically and the LED lights on the front panel of the server

illuminate. The LCD screen shows the start-up progress.

Figure 4: Connect power and network cables

Step 2

Step 1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

No comments

Seagate NAS 400 User's Guide Page 15