Seagate NAS 400 User's Guide download pdf (Page 55)

Removing and Replacing a Disk Drive

BlackArmor® NAS 440/420 User Guide (Version 3) 57

8. Position (hold) the hard drive/carrier so that the drive label is facing up and the text is

readable (not upside down).

9. Carefully bend the left side of the plastic carrier outward to release the failed drive from

the carrier.

10. Remove the failed hard from the plastic carrier enclosure.

Replacing a Hard Drive

1. Place the new hard drive into the carrier, ensuring that the four pins hold the drive

securely in place. If you are replacing a damaged hard drive carrier, place the drive

removed from the damaged carrier into the replacement carrier.

2. Carefully slide the new drive into the server. Push firmly to install it completely, and then

close the handle to lock the drive in place.

The hard drive’s LED should turn green.

3. Close the front panel of the server.

4. In BlackArmor Manager, the drive’s status changes to Foreign.

5. Click the Claim Disk icon, and then click OK. The drive’s status changes to Good.

6. Click the Recover icon, and then click OK.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

No comments

Seagate NAS 400 User's Guide Page 55