Seagate NAS 400 User's Guide download pdf (Page 53)

Removing and Replacing a Disk Drive

BlackArmor® NAS 440/420 User Guide (Version 3) 55

Removing and Replacing a Disk Drive

Follow these steps to replace a hard drive in the BlackArmor® NAS 440/420 server. You may

also use these instructions to replace a damaged hard drive carrier.

Note: Only Seagate hard drives can be used for replacement. Failure to use Seagate replacement

parts can and will forfeit the warranty period of the BlackArmor NAS 440/420.

WARNING: ESD Precautions

Electrostatic discharge (ESD) can damage the processor, hard drives, main board, memory

modules (RAM), and other BlackArmor components. Always observe the following

precautions before replacing a hard drive:

• Do not remove a component from its protective packaging until you are ready to install it.

• Do not touch the component pins, leads, or circuitry.

• Wear a wrist grounding strap and attach it to a metal part of the system before handling

components. If a wrist strap is not available, maintain contact with the system throughout

any procedure requiring ESD protection.

• Keep the work area free of nonconductive materials, such as ordinary plastic assembly

aids and foam packing.

Removing a Hard Drive

1. Open the BlackArmor Manager Web interface.

2. In the menu bar, select Storage, and then click Disk Manager.

3. Beside the failed disk drive, click the Safely Remove Disk icon, and then click OK.

4. Open the front panel of the server.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

No comments

Seagate NAS 400 User's Guide Page 53