Seagate ST3300007LW User's Guide Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 89
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
An underscore character (_) indicates no drives found in that bus position. An asterisk (*)
indicates a device has been found. The block
character (
) represents the bus position
occupied by SCSI Hammer™. The image
displayed above indicates one drive is present in
position 1, with SCSI Hammer™ occupying SCSI
ID 7.
Figure 7 depicts the result of a ‘Scan For Devices’ showing eight (8) devices attached to a
SCSI device to which SCSI Hammer™ has been connected. Beginning with SCSI ID 0 at
the right most portion of the screen, it can be determined that SCSI Hammer™ is occupying
SCSI ID 7 and the attached drives are occupying SCSI IDs 3, 4, 5, 8, 9, 10, 12 and 14.
Figure 7 - SCSI Hammer has discovered eight (8) drives
Progress during the erasure process is displayed in increments of ten percent (10%). Using
the drives depicted in Figure 8; Figure 9 shows the erasure process on ‘A SIDE’ of
SCSI Hammer™.
SCSI Hammer Notes:
The default SCSI ID used by SCSI Hammer™ is
SCSI ID 7; this may be changed by the user.
This setting is located in the ‘Settings/BUS ID’
menu.
Figure 8 - SCSI Hammer™ performing an erasure on 'A Side'
Figure 9 is an annotated explanation of the LCD image in Figure 8.
Definition
No Drive
Present
10% Percent
Complete
No Drive
Present
Zero Percent
Complete
No Drive
Present
30% Percent
Complete
20% Percent
Complete
20% Percent
Complete
SCSI
Hammer™
No Drive
Present
10% Percent
Complete
10% Percent
Complete
10% Percent
Complete
No Drive
Present
No Drive
Present
No Drive
Present
SCSI ID
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Figure 9 - Annotated description of SCSI Hammer LCD
None of the fifteen (15) available SCSI ID positions show ‘E’, indicating that no errors have
been encountered.
SCSI Hammer™ Users Guide
Page 18 of 89
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 88 89

Comments to this Manuals

No comments