Seagate ST3300007LW User's Guide download pdf (Page 82)

The “Alert Settings” Tab – CPR Toolbox™ Reporting

Figure 47 - Alert Settings Tab

The Alert Settings tab provides a method for email

alerts to be issued at pre-defined periods during a an

action performed by any CPR Tools’ device (PSIClone™,

Hammer™, SCSI Hammer™, etc…).

SCSI Hammer™ Users Guide

Page 82 of 89

This version of CPR Toolbox™ allows for the

configuration of alert settings for devices not currently

attached to the host PC.

Begin by either selecting a currently connected device

from the ‘Selected Device’ drop-down list or by clicking

the ‘Add Device’ button to configure Alert Settings for a device not currently connected.

This is discussed in the section titled Alert Settings for Devices not currently connected

beginning on page 86 of this guide.

CPR Toolbox™ Notes:

The ability to send email alerts

requires an underlying connection to

the internet, usually through a

network to which the host PC running

CPR Toolbox™ is connected. If no

internet connection is present,

sending of alert emails will fail.

Figure 55 depicts the currently

connected Hammer™ as the

selected device.

Figure 48 - Working with a connected CPR Tools' device

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88 89

No comments

Seagate ST3300007LW User's Guide Page 82