Seagate ST3300007LW User's Guide Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 89
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Operations
Menu Tree
The Operations menu tree defines how SCSI
Hammer™ will act when used in stand-alone
mode. The five (5) operations listed will
either be performed or not, depending upon
their settings here. Settings changed here
will be saved as user defaults. SCSI
Hammer™ may be restored to factory
default settings by navigating to the
‘Settings’ menu and selecting ‘Restore
Defaults’.
|========================
|OPERATIONS
|--------ERASE DRIVE
|--------|-----BANG*
|--------|-----SECURE ERASE
|--------|-----3 PASS
|--------|-----7 PASS
|--------VERIFY DATA
|--------|-----ENABLED
|--------|-----DISABLED*
|--------PRINT LABELS
|--------|-----ENABLED
|--------|-----DISABLED*
|--------SET NATIVE MAX
|--------|-----ENABLED*
|--------|-----DISABLED
|--------POWER DOWN
|--------|-----AFTER COMPLETE
|--------|-----LEAVE DRIVES ON*
|========================
Defaults: Indicated by * above.
Operations Submenus
Each of the ‘Operations’ submenus are described in detail:
|========================
SCSI Hammer™ Tips:
SCSI Hammer™ overwrites (eradicates)
data at the maximum speed supported by
the HDD to which it is writing.
|OPERATIONS
|--------ERASE DRIVE
|--------|-----BANG*
|--------|-----SECURE ERASE
|--------|-----3 PASS
|--------|-----7 PASS
Erase Drive
Default: Erase Drive
This setting instructs SCSI Hammer™ to erase all drives attached to the device either
using the default (Bang) or Secure Erase methods.
Selecting the default (Bang) option, instructs SCSI Hammer™ to overwrite each
sector with
0x00.
Selecting ‘Secure Erase’, instructs SCSI Hammer™ to call upon the firmware of the
attached drive(s) to execute and monitor the erase procedure. Once this process is
initiated on a drive, the data is locked until a successful "Secure Erase" has
completed. This process conforms to NIST 800-88 ‘purge’ guidelines.
Selecting ‘3 Pass’ will instruct SCSI Hammer™ to overwrite each sector on the drive
three (3) times in compliance with 3 Pass standard for data eradication.
Bang operations will perform as much as two times faster than CPR Tools SCSI
Secure Erase functions.
SCSI Hammer™ Users Guide
Page 21 of 89
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 88 89

Comments to this Manuals

No comments