SCSI Hammer™ Users Guide
Page 87 of 89
FAQ / Troubleshooting
1. After starting SCSI Hammer™, LCD does not light, device is unresponsive.
Ensure power cable is connected to the device and a working power source.
2. CPR Toolbox™ does not display any attached CPR Tools devices.
Ensure USB Cable is attached to both SCSI Hammer™ and the host PC.
Only USB 2.0 is supported.
3. Windows
®
asks for a driver when I plug in SCSI Hammer™ to a USB port on my PC.
SCSI Hammer™ is connected to a USB 1.1 port
o RESOLUTION: USB 2.0 is required; CPR Tools recommends updating
SCSI Hammer™ to the most recent firmware available using the CPR
Flash utility which ships with SCSI Hammer™.
Comments to this Manuals