Seagate ST3300007LW User's Guide download pdf (Page 85)

Successful sending of the test email should result in the destination/recipient address’

receipt of an email similar to the one depicted here:

Email settings test email.

Recipient: technici[email protected]

Server: mail.cprtools.net

Authentication Required: No

The right side of the Alert Settings tab provides configuration options which are used to

determine when Email Alerts are sent by CPR Toolbox™. This is shown in Figure 53.

Figure 53 - Alert Settings Configuration

To be alerted by email upon the ‘start’ of a Hammer™/CPR Toolbox™ operation, check the

box marked ‘Alert on Start’

To instruct CPR Toolbox™ to send email alerts at regular intervals during a Hammer™/CPR

Toolbox™ operation, check the box marked ‘Incremental Alerts’ and set either a value in

minutes or percentage complete for the period at which email alerts will be sent.

To receive email alerts when Hammer™/CPR Toolbox™ receive errors during an operation,

check the box marked ‘Alert on Error’ and select from ‘First’, ‘All’ or select a value for how

many errors should be encountered before Hammer™/CPR Toolbox™ sends an alert.

To be alerted when the operation is complete, check the box marked ‘Alert on End’.

The alert settings created are tied to the device listed in the ‘Selected Device’ list. This

version of CPR Toolbox™ allows for the creation of custom alert settings for CPR Tools’

devices which are not currently connected to the host PC running CPR Toolbox™.

SCSI Hammer™ Users Guide

Page 85 of 89

1 2 ... 80 81 82 83 84 85 86 87 88 89

No comments

Seagate ST3300007LW User's Guide Page 85