Seagate ST200FP0021 Specifications download pdf (Page 36)

Scheduled Record Setup

In the Setup Menu, use ▲▼ to change the highlighted option to Scheduled Record, then

press Enter to call up Scheduled Record Setup. The Scheduled Record Setup allows the

administrator to define when and how to record for the system. There are up to 16 time segments

(T1 – T16) for each day of the week. General operations of this menu are defined below.

• ▲▼ : (Mouse: Left click) Use these buttons to select the desired menu or area.

• Copy: Use this button to: copy the settings of (1) the current camera to all the following cameras

or (2) the currently selected day to all the following days in the menu.

• Mode: (Mouse: Left click) Use this button to enter the Easy Setup menu for Schedule Record.

• Esc: (Mouse: Right Click) Use this button to escape from the current screen, and return to the

previous menu. If the Save dialog is shown, press Enter to exit and save, or Esc (Mouse: Right

Click) to exit without saving.

• Mode: This option defines whether or not the selected mode applies to all cameras or an

individual camera. Use the +/- buttons to change the value.

• Camera: Use the +/- buttons to select an individual camera.

• Start: Defines the start time of the current time segment, in increments of 30 minutes. (The end

of this time segment is set as the start time of next time segment, or the start time of the first time

segment on the same day.) Use the +/- buttons to select the desired start time.

• Alarm: This option defines the recording mode when an alarm is triggered. (No, Video,

Audio/Video) “Off” is for alarm detection Off. Use the +/- buttons to change the value..

• Motion: This option defines the recording mode when motion is detected. (No, Video, or

Audio/Video) “Off” is for motion detection Off. Use the +/- buttons to change the value.

• Normal: This option defines the normal recording mode, including No, V (Video only), or A/V

(Audio/Video). Use the +/- buttons to change the value.

◄►

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

No comments

Seagate ST200FP0021 Specifications Page 36