Seagate ST200FP0021 Specifications download pdf (Page 50)

Network Setup

In the Setup Menu, use ▲▼ to change the highlighted option to Network, and then press

Enter to call up Network Setup menu. The Network Setup menu allows the administrator to setup all

Ethernet network related parameters. Check with your network administrator to verify you are setting

these parameters correctly. General operations of this menu are defined below.

• ▲▼ : (Mouse: Left click) Use these buttons to select the desired menu or area.

• Esc: (Mouse: Right Click) Use this button to escape from the current screen, and return to the

previous menu. If the Save dialog is shown, press Enter to exit and save, or Esc (Mouse: Right

Click) to exit without saving.

• Net Type: This option is used to select your network type. The options available are Static IP,

PPPoE, or DHCP. For internet access, make sure the below IP Address is a public IP address.

Otherwise, a router with public IP address is required, and the router must be setup for port

mapping (forwarding) to the DVR, or a CMS server must be used. Use the +/- buttons to change

the Network type.

• IP Address: This option defines the Ethernet IP address. Follow the text input instructions on page

16 to enter this address.

• Net Mask: This option defines the Subnet Mask used for your Ethernet IP address. Follow the text

input instructions on page 16 to enter this address.

• Gateway: This option defines the Ethernet Gateway IP address. The priority of the Gateway is (1)

Ethernet Gateway and (2) a 3G Gateway. Follow the text input instructions on page 16 to enter this

address.

• DNS: This option defines the DNS (Domain Name Server) IP address for your Ethernet

connection. Follow the text input instructions on page 16 to enter this address.

◄►

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 85 86

No comments

Seagate ST200FP0021 Specifications Page 50