Seagate TS-251-4G User Manual download pdf (Page 226)

226

be created for each partition on the destination as the backup folder. The backup

folder will be named with the backup date and the partition number, YYYYMMDD-1

for partition 1, YYYYMMDD-2 for partition 2... and so on. If the source storage

device contains only one partition, the backup folder will be named as YYYYMMDD

only.

Data copy using front USB port

The NAS supports instant data copy backup from the external USB device to the NAS

or the other way round by the front one touch copy button. To use this function,

follow the steps below:

1. Make sure a hard drive is installed and formatted on the NAS. The default shared

folder Qusb/Usb has been created.

2. Turn on the NAS.

3. Configure the behavior of the Copy button on "Backup Station" > "USB One Touch

Copy" page.

4. Connect the USB device, for example, digital camera or flash, to the front USB port

of the NAS.

5. Press the Copy button once. The data will be copied according to your settings on

the NAS.

Note:

Incremental backup is used for this feature. After the first time data backup,

the NAS only copies the changed files since the last backup.

Caution:

Files are copied from the source to the destination.

Extra files on the

destination will be deleted; files of the sam e nam es will be overwritten by

the source.

Source data will remain unchanged.

As an external storage drive

When an external device is connected to the front USB port, it will be identified as an

external storage drive connected to the port.

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 312 313

No comments

Seagate TS-251-4G User Manual Page 226