Seagate ST3300007LW User's Guide download pdf (Page 24)

Scan For Devices

Menu Tree

|========================

|SCAN FOR DEVICES

|--------A SIDE

|--------B SIDE

|========================

Default: N/A

SCSI Hammer™ will automatically scan for all attached drives upon power-up. During the

initial scan, Hammer™ presents the quantity of drives found on each Side of the device.

Scanning is performed navigating to the

SCAN FOR DEVICES menu item; select this

item by pressing the RIGHT navigation

button. ‘A Side’ is shown.

To initiate a scan on ‘A Side’, press the

RIGHT navigation button.

To select ‘B Side’, press the DOWN

navigation button. To initiate a scan on ‘B

Side’, press the RIGHT navigation button.

SCSI Hammer™ displays ‘Scanning for

Devices’ while performing a scan on either

side of the device.

Upon completion of a scan for devices,

Hammer displays ‘Devices Present’ and a

representation of devices found on the bus.

SCSI Hammer™ enumerates bus positions

from right to left, starting with position zero

(0).

An underscore character (_) indicates no

drives found in that bus position. An

asterisk (*) indicates a device has been

found. The block character (▮) is the bus

position occupied by SCSI Hammer™.

SCSI Hammer Notes:

To identify drives connected, SCSI

Hammer™ displays sixteen (16) bus

locations (0 through 15).

These are enumerated from right to

left. In the image above, 1 drive is

shown in with SCSI ID 1; SCSI

Hammer™ is shown with its default

SCSI ID of 7.

To return to the main menu, press the

LEFT navigation button.

SCSI Hammer Notes:

The SCSI ID used by SCSI Hammer™ defaults to

7 but may be changed by the user. This setting

is located in the ‘Settings/BUS ID’ menu.

SCSI Hammer™ Users Guide

Page 24 of 89

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 88 89

Comments to this Manuals

No comments

Seagate ST3300007LW User's Guide Page 24

Comments to this Manuals

Related products and manuals for Software licenses/upgrades Seagate ST3300007LW