SCSI Hammer™ Users Guide
Page 35 of 89
SCSI Bus Termination with SCSI Hammer™ (continued)
2. When connecting SCSI Hammer™ to a SCSI hard drive enclosure or server, the
enclosure will typically handle the termination on the opposite end of the SCSI chain;
therefore, when connecting a SCSI Hammer™ to a hard drive enclosure or
server, there should be no terminators on the cable.
In this scenario, SCSI Hammer™ will appropriately terminate the ‘near end’ while the
hard drive enclosure will appropriately terminate the ‘far end’ of the SCSI chain.
Comments to this Manuals