Seagate ST3300007LW User's Guide download pdf (Page 27)

SCSI Hammer™ Users Guide

Page 27 of 89

Verify

Menu Tree

|========================

|VERIFY

|========================

Defaults: N/A

The ‘Verify’ menu provides an easy method for validating a statistical sampling of all drives

have been subjected to data eradication.

As with all SCSI Hammer™ operations, the LCD will provide status through the use of

percentage indicators.

‘Verify’ checks a sampling of all available sectors for

0x00. For each drive verified, SCSI

Hammer™ will display ‘D’ to indicate ‘Done, no errors found’ or ‘E’ to indicate ‘Errors Found’

Clear Logs

Menu Tree

|========================

|CLEAR LOGS

|========================

Defaults: N/A

The ‘Clear Logs’ menu provides an easy method to clear all logs stored in the device’s flash

memory. In addition to clearing the logs stored in the device’s flash memory, a thorough

test of the flash memory is also performed. To initiate the ‘Clear Logs’ function, press the

RIGHT navigation button. SCSI Hammer™ will display ‘CLEAR LOGS. CONTINUE?’; press

the RIGHT button to instruct SCSI Hammer™ to clear the logs and being the flash memory

test.

Once completed, SCSI Hammer™ will report ‘LOGS CLEARED | FLASH OK’ on the LCD when

finished. If the ‘Clear Logs’ function reports ‘FLASH ERROR’, contact CPR Tools, Inc. for

technical support.

To clear the flash memory and retain a copy of the logs stored therein, use the host

companion software CPR Toolbox™.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 88 89

No comments

Seagate ST3300007LW User's Guide Page 27